Nano-Wipers » Packaging

Package contents

One package of Nano-Wipers contains:

  • 25ml bottle of Nano-Clean (blue)
  • 25ml bottle of GProtect (red)
  • 1 blue cloth
  • 1 red cloth

One package should be sufficient to coat a car’s windshield and headlights.


Store at temperatures between +5°C and +40°C. Protect from frost, direct sunlight and overheating. Keep the packaging tightly sealed.

How to apply

Conditions before application

  • Temperature: +5 °C to +30 °C
  • Windshield must be dry & clean
  • Avoid direct sunlight
  • Apply in a ventilated area

Phase 1

Shake the blue bottle before trimming the tip using a knife. Repeatedly spray small amounts on the car glass and polish outwards with the blue cloth.

If done correctly, you should feel friction between the glass and the cloth.

Allow the preparation to act for 5 minutes.

The recommended amount is 10–15 ml per 1m².

Phase 2

Shake the red bottle and trim the tip. Repeatedly spray small amounts and thoroughly polish using the red cloth.

If done correctly, the cloth should slide cleanly on the car glass.

Allow the preparation to act for 24 hours in a dry place. Make sure the temperature stays between +5 °C and +30 °C.

The recommended amount is 10–15 ml per 1m².


Your car glass should now be treated and water droplets should smoothly flow off the windshield when driving at speeds upwards of 60 kph (40 mph). Impurities on the glass should be carried away by the water, and insects or winter icing should become easier to remove.


Every 5000 km (3000 miles), it is recommended to degrease the treated car glass to refresh the nano-layer’s effect, as a thin film of grease is accumulated during regular use. Any alcohol-based cleaner should suffice.